Perle CM-100-S2ST80 - Fiber media converter - 100Mb LAN - 100Base-TX, 100Base-ZX - RJ-45 / ST single-mode - up to 49.7 miles - 1550 nm

Perle CM-100-S2ST80 - Fiber media converter - 100Mb LAN - 100Base-TX, 100Base-ZX - RJ-45 / ST single-mode - up to 49.7 miles - 1550 nm
1 / 1

Description

    • Backup and restore. Provides fast and easy module replacement. Management module will always save a copy of the media converter configuration and will restore this configuration automatically to the media module when it is detected in the slot.
    • Auto-MIDX. Auto-MDIX detects the signaling on the UTP interface to determine the type of cable connected and automatically configures the connection when enabled. With auto-MDIX enabled, either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable. Can manually set auto or MDIX on the copper port via on-board strap or via the management card.
    • Link pass-through. With link pass-through the state of the 100Base-TX receiver is passed to the 100Base-FX transmitter to make the media converter appear transparent to the end devices that are connected. In addition if far-end fault is enabled the media converter can turn off the 100Base-TX transmitter when a far-end fault is received.