Crucial 16GB (2 x 8 GB) DDR3L SDRAM Memory Kit - For Desktop PC - 16 GB (2 x 8GB) - DDR3L-1600/PC3-12800 DDR3L SDRAM - 1600 MHz - CL11 - 1.50 V - Unbuffered - 240-pin - DIMM
1 / 1
$81.99/each
Description
DDR3L 240-pin DIMM
Desktop modules that operate at speeds up to 1600 MT/s and have a CL11 latency. It is dual voltage and can operate at 1.35V or 1.5V. It is Unbuffered and is non-ECC. It conforms to the industry standard UDIMM layout of 240 pins and is compatible with computers that take DDR3 UDIMM memory.
A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.
Each 240-pin DIMM provides a 64-bit data path (72-bit for ECC or registered or Fully Buffered modules).
To use DDR3 memory, your system motherboard must have 240-pin DIMM slots and a DDR3-enabled chipset. This is because a DDR3 SDRAM DIMM will not fit into a standard DDR2 DIMM socket or a DDR DIMM socket.
The number of black components on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are approximately 5.25 inches long and 1.18 inches high, though the heights can vary. While 240-pin DDR3 DIMMS, 240-pin DDR2 DIMMs, 184-pin DDR DIMMs, and 168-pin DIMMs are approximately the same size, 240-pin DIMMs and 184-pin DIMMs have only one notch within the row of pins.
Up to 1600 MHz speed with Unbuffered signal and CL11 latency for smooth computer performance
16 GB bar will run multiple applications together and enhance your computer's performance
DDR3L-1600/PC3-12800 interface synchronizes electrical and clock signals for an efficient data transfer rate