Perle Fast Ethernet PoE Ethernet Extender eXP-4S110E-BNC - Network extender - 100Mb LAN, Ethernet over VDSL2 - 10Base-T, 100Base-TX - 4 ports - up to 1.9 miles

Perle Fast Ethernet PoE Ethernet Extender eXP-4S110E-BNC - Network extender - 100Mb LAN, Ethernet over VDSL2 - 10Base-T, 100Base-TX - 4 ports - up to 1.9 miles
1 / 1

Description

    • Fixed speed and duplex. Some Ethernet equipment require a fixed speed and duplex be used or cannot auto-negotiate. By disabling auto-negotiation on the Ethernet extender, a fixed speed of 10 or 100 mbps as well as full or half duplex can be configured through DIP switches.
    • Auto-MDIX. Auto-MDIX detects the signaling on the 10/100 Ethernet RJ45 interface and determines the type of cable connected (straight-through or crossover) and automatically adopts a compatible pinout.
    • PSE status indicator. A multi-color LED provided presents the status of the PSE function for easy troubleshooting of power over Ethernet connections.
    • Plug and Play operation. Perle Ethernet extenders will automatically configure your VDSL interlink connection. The CO/CPE peer association will be determined automatically by the Ethernet extender. No need to set CO/CPE VDSL pairing.
    • On-board PoE power controller. As a fully compliant IEEE 802.3af PSE end-span device, this Ethernet extender's PoE power controller provides compliant power provisioning and monitoring, properly sensing through signature detection whether or not the attach Ethernet devices are PoE capable or not. This provides a safe connection for both PoE and Non-PoE capable devices.
    • Link pass-through. With link pass-through the state of the 10/100Base-TX Ethernet connection is "passed through" the VDSL link to the 10/100Base-TX Ethernet connection on its remote peer. A managed switch on the remote end can then report the state to its network management system so that any errors can be detected and recovered early.
    • Power strain relief strap. A strain relief strap is provided to ensure a solid and secure power connection to the Ethernet extender. It is ideal for areas that may be exposed to vibration.
    • Power multiplier selection. When used with 4-pair cable such as CAT5 on the VDSL Interlink port, an optional internal strap selection on the Ethernet extender will provide VDSL transmission data on 1 pair and power across the 3 other pairs enabling even greater distances for power transmission to be achieved.